Sinyal ve Kontrol Kabloları
_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Çinko / Zn
Kurşun / Pb
Özel Uygulamalar
Nyfors AutoCoater 2
Ürün Kodu VKCAXJ
Nyfors Product. Designed for high strength applications, the AutoCoater 2™ restores the protective coating on spliced acrylate-coated optical fibers. It is fully automatic, allowing for operator skill independence in factory environments with high productivity and cost advantages.
Features
- Consistent, high quality recoating
- Automatic and operator independent
- Short cycle time
- Linear or mandrel strength testing
- Uniform diameter, overcoating and undersize recoating capability
- Easy exchange of recoating resin type
- No need for compressed air or vacuum
- High and low index recoating
Specification Sheet
The USC-03 is Ultrasonic Cleaner designed for the cleaning of optical fiber using the FH-40, 50, 60 and 100 series of Fujikura Fiber Holder. Timer switch and Cleaning Power Volume enable to edit cleaning program. By using this equipment the fiber can be cleaned after stripping without any physical contact.
Ürün Başarıyla Sepete Eklendi
The CT-102 is designed for cleaving silica fiber with 80 to 250mm cladding diameter, specially for its angle cleaving capability.
Ürün Başarıyla Sepete Eklendi
Ürün Başarıyla Sepete Eklendi
Nyfors Producrts.The extended length ReCoater 2 XL is used to restore the protective coating on acrylate-coated optical fibers in high strength applications. Designed to process long sections of stripped fiber, it accepts silicone molds of up to 110 mm length.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
